LM 373 N Contact-Grease

DESCRIPTION LM 373 N Contact Grease is a grease-type, fully synthetic contact treatment preparation which is compatible with plastics and free of silicones. The special additives, synthetic oil and consistency modifiers in this product ensure that it can be used over a wide range of temperatures. The product shows no signs of chemical decomposition or resinifying even after long periods of use.-

PROPERTIES - high resistance to ageing
- the synthetic base oil has excellent viscosity/temperature properties
- very good low and high temperature properties
- outstanding wear protection
- low friction
- protection against corrosion and oxidation

TECHNICAL
DATA Colour : natural colours
Basis : synthetic oil
consistency modifiers : inorganic thickeners
Density at 20 °C : 0.9 g/ml DIN 51 757
Flow pressure at -35°C : 450 hPa DIN 51 805
Drop point : non-drip DIN ISO 2176
NLGI number : 1 DIN 51 804
Operating temperature range: -40 °C to +150 °C
Oil separation : < 10 wt % DIN 51 817
Water resistance : 0 - 1 DIN 51 807
Copper corrosion : 0 DIN 51 811
Specific electrical
resistance : 2.4 · 107 Ohm · cm

APPLICATION LM 373 N Contact Grease is used for lubricating and treating the mechanical and electrical components in switches. LM 373 N Contact Grease is also used for fine mechanical products. The product can be used over a wide range of temperatures, is very compatible with plastics and is extremely stable to ageing.

INSTRUCTIONS Before treating with LM 373 N Contact Grease, the contact surfaces must be clean and free from residues such as lubricants, dirt and moisture. Apply the product as a thin, uniform layer.

AVAILABLE
PACK SIZE LM 373 N Contact Grease 500 g can Part no. 3151
LM 373 N Contact Grease 5 kg tub Part no. 3153
LM 373 N Contact Grease 25 kg hobbock Part no. 3151